Advanced Non-Destructive Testing
-
IRIS
Internal rotary inspection system (IRIS) ultrasonic test method is employed for testing of pipes and tubes in boilers, heat exchangers and fin-fan tubes. The IRIS probe is inserted into a tube that is flooded with water, and the probe is pulled ou...
More... -
Computed Radiography
Computed radiography (CR) is used to assess internal or external corrosion/erosion losses in process piping, pressure vessels and valves. Based on it, one can estimate remaining thickness and wall losses. The computerized images allow easy data shari...
More... -
Digital Radiography
Digital Radiography is one of the newest forms of radiographic imaging. Since no film is required, digital radiographic images are captured using either special phosphor screens or flat panels containing micro-electronic sensors. Captured images can ...
More... -
Eddy Current Testing
This technique is used to detect surface and near surface defects on relatively small areas; without the need to remove surface paint prior to testing. The equipment is light and compact and provides immediate feedback, making it ideally suited for i...
More... -
Ndt Testing By X-Ray Crawler
Automated X–ray systems for testing of weld joints use x–ray tubes or gamma–heads mounted on crawlers, which move through the pipe. Crawlers allow the positioning of the radiation source precisely in the center of the pipe and can panorami...
More... -
Guided Wave Long Range Ultrasonic Testing
We offer Guided Wave testing (GWT),which is one of latest methods in the field of non-destructive evaluation. It is also known as Guided Wave Ultrasonic Testing (GWUT) or Long Range Ultrasonic Testing (LRUT). The method employs mechanical stress ...
More... -
Magnetic Flux Leakage Testing
Magnetic Flux Leakage testing (MFL) is a technique used for the inspection of tubes made of ferrous materials. This technique will normally be applied as a fast screening technique if small diameter pitting is expected. Because of limitations to its ...
More... -
Paut (Phased Array) Testing
Phased Array ultrasonic testing (PAUT) is an advanced method of ultrasonic testing. Phased array ultrasonic method can reveal defects embedded in the material that cannot be easily resolved with conventional ultrasonic testing. The phased array p...
More... -
Tofd Testing
Time of Flight Diffraction (TOFD) is an advanced method of Ultrasonic inspection that leverages on existing UT methodologies thereby bringing a whole new range of testing and detection capabilities to the NDT forefront. Whilst conventional ultraso...
More...