Our Services
-
Training
Our training courses are designed in such a way that human resources are connected with latest technology. The theory and contents of our training program are easily understandable and trainees will be able to adopt them. We understand that our train...
More... -
Qa / Qc Inspections
Enkon has a worldwide network of technically competent and highly skilled, multi-disciplined Auditors and Quality Surveillance Engineers who are capable of monitoring, advising and reporting on a wide range of activities involved in the oil and gas c...
More... -
Welder Certification And Procedure Qualification
Enkon has expanded its quality assurance and third party inspection services to include a comprehensive welder certification and welding procedure qualification program. As part of this enhanced service offering, Enkon undertake s the following: ...
More... -
Hydrogen Attack Evaluation
The presence of hydrogen in industrial plants is a potential source of damage. High partial hydrogen pressure (higher than 30 bar) and high temperature (higher than 300 ºC) can negatively influence the material’s characteristics. Such damage occur...
More... -
Holiday Testing
Holiday testing is a non-destructive test method applied on protective coatings to detect unacceptable discontinuities such as pinholes and voids. The test involves checking an electric circuit to see if current flows to complete the circuit. This te...
More... -
Sandblasting Test
Sandblasting, as a pre-treatment, is a key factor in surface technology in terms of how the quality of the coating effects the surface of the part or component. Sandblasting is frequently used with hard chrome plating, hard chrome plating for repair ...
More... -
Paint And Coating Testing
Enkon provides all required paint and coating inspection services, whether for marine environments or plant service. Inspection, verification and reporting is done in accordance with NACE procedures by certified inspectors. Client consultation and QA...
More... -
Vacuum Box Testing
Vacuum box bubble test is one of the safest and reliable non-destructive test method. Vacuum Box Testing is used in order to locate seam leaks in the welds of storage tanks. A detergent solution is commonly used in this testing method and a vacuum...
More... -
Hardness Testing
Hardness is the property of a material that enables it to resist plastic deformation, usually by penetration. However, the term hardness may also refer to resistance to bending, scratching, abrasion or cutting. Hardness of materials has ...
More... -
IRIS
Internal rotary inspection system (IRIS) ultrasonic test method is employed for testing of pipes and tubes in boilers, heat exchangers and fin-fan tubes. The IRIS probe is inserted into a tube that is flooded with water, and the probe is pulled ou...
More... -
Computed Radiography
Computed radiography (CR) is used to assess internal or external corrosion/erosion losses in process piping, pressure vessels and valves. Based on it, one can estimate remaining thickness and wall losses. The computerized images allow easy data shari...
More... -
Digital Radiography
Digital Radiography is one of the newest forms of radiographic imaging. Since no film is required, digital radiographic images are captured using either special phosphor screens or flat panels containing micro-electronic sensors. Captured images can ...
More... -
Eddy Current Testing
This technique is used to detect surface and near surface defects on relatively small areas; without the need to remove surface paint prior to testing. The equipment is light and compact and provides immediate feedback, making it ideally suited for i...
More... -
Ndt Testing By X-Ray Crawler
Automated X–ray systems for testing of weld joints use x–ray tubes or gamma–heads mounted on crawlers, which move through the pipe. Crawlers allow the positioning of the radiation source precisely in the center of the pipe and can panorami...
More... -
Guided Wave Long Range Ultrasonic Testing
We offer Guided Wave testing (GWT),which is one of latest methods in the field of non-destructive evaluation. It is also known as Guided Wave Ultrasonic Testing (GWUT) or Long Range Ultrasonic Testing (LRUT). The method employs mechanical stress ...
More... -
Magnetic Flux Leakage Testing
Magnetic Flux Leakage testing (MFL) is a technique used for the inspection of tubes made of ferrous materials. This technique will normally be applied as a fast screening technique if small diameter pitting is expected. Because of limitations to its ...
More... -
Paut (Phased Array) Testing
Phased Array ultrasonic testing (PAUT) is an advanced method of ultrasonic testing. Phased array ultrasonic method can reveal defects embedded in the material that cannot be easily resolved with conventional ultrasonic testing. The phased array p...
More... -
Tofd Testing
Time of Flight Diffraction (TOFD) is an advanced method of Ultrasonic inspection that leverages on existing UT methodologies thereby bringing a whole new range of testing and detection capabilities to the NDT forefront. Whilst conventional ultraso...
More... -
Ferrite Testing
Austenitic, Duplex, Super-duplex stainless steels require adequate proportion of ferrite in the product to obtain acceptable corrosion resistance and strength and especially resistance to Stress Corrosion Cracking. The laboratory based destructive...
More... -
Positive Material Identification Testing (Pmi)
Enkon prides itself on our ability to meet and exceed our customer’s expectations. One of these requirements is to provide material traceability of components built into our product. Inclusion of material test reports (MTRs) has been the accepted m...
More... -
Ultrasonic Thickness Testing
Ultrasonic Thickness Testing is a method of nondestructive testing that measures the local thickness of a solid element, either metal or composite based on the time it takes for an ultrasonic wave to return to the surface. As ultrasonic waves have...
More... -
Visual Testing (VT)
Visual Testing (VT) is the most common and usually first NDT examination step when the inspector using his eyes to look for defects. The human eye has an amazing ability to differentiate between colors, hues, shapes, sizes contrast and texture. Inspe...
More... -
Liquid Penetrant Testing
Penetrant testing – Based on the properties of capillary action, or the phenomenon of a liquid rising or climbing when confined to a small opening due to surface wetting properties of the liquid, Penetrant testing is used for finding surface breaki...
More... -
Magnetic Particle Testing
Used for finding surface/near surface defects in ferromagnetic material, Magnetic Particle testing (MT) is a versatile inspection method used for field and shop applications. Magnetic particle testing works by magnetizing a ferromagnetic specimen u...
More... -
Ultrasonic Testing
Traditional Ultrasonic inspection uses high frequency sound energy to conduct examinations and perform measurements. Considerable information may be gathered during ultrasonic testing such as the presence of discontinuities, material or coating thick...
More... -
Radiographic Testing
Industrial radiography is used for a variety of applications but is commonly performed using two different sources of radiation, X-Ray and Gamma ray sources. The choice of radiation sources and their strength depends on a variety of factors including...
More... -
Non Destructive Testing
"Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure d...
More...